Likes Given
22 Likes
-
Pmccooey liked post by Veg On thread : Installing 48 IDAsI stripped mine and found one of the jets wasn't the same as the others plus a few bits were missing. Nothing Weber is cheap but they are very simple carbs so easy to work on. I purchased a copy of...Liked On: 02-18-2026, 06:57 AM
Posted On: 02-09-2026, 03:33 AMPmccooey liked post by Cobrakeith On thread : Throttle linkage for Weber 48 IDAsJim Inglese has a FIA 48 IDA linkage set up like your looking for. You can go to his web site at: jimingelese.comLiked On: 11-02-2024, 06:14 PM
Posted On: 11-01-2024, 08:22 AMPmccooey liked post by ALF On thread : Weber 48 Ida throttle cable and bracketContact John "CompClassics" in case you're interested on a correct Weber linkage. I'm sure he can help. My last order: http://www.clubcobra.com/forums/picture.php?albumid=1019&pictureid=17777Liked On: 10-30-2024, 06:40 AM
Posted On: 10-30-2024, 02:44 AMPmccooey liked post by PaulProe On thread : Weber 48 Ida throttle cable and bracketTake a look at Pierce Manifolds, they'll have all the pieces you need PaulLiked On: 10-29-2024, 06:31 AM
Posted On: 10-28-2024, 05:59 PMPmccooey liked post by patrickt On thread : Ididit dimmer relayThen I would wire it just like the ERA schematic in the second link. It's straight forward and hasn't given me a hiccup in almost 20 years.Liked On: 10-07-2024, 09:12 AM
Posted On: 10-04-2024, 05:15 PMLinks monetized by VigLinkPmccooey liked post by 1795 On thread : Weber winter projectSay hi to a few people in other threads. You have to post a minimum number of posts/replies on the site before you are allowed to post pictures.Liked On: 09-25-2024, 02:18 PM
Posted On: 09-25-2024, 01:53 PMPmccooey liked post by 1795 On thread : Weber winter projectPost a picture of the throttle linkage so we know what you are working with. There different linkage setups available.Liked On: 09-25-2024, 08:43 AM
Posted On: 09-25-2024, 08:26 AMPmccooey liked post by talos On thread : Weber winter projectThe best place to start is with your camshaft. Basically the LSA should be between 112-114. Compare that with your cam. I'm sure there are many people on this forum to give you the correct grind. To...Liked On: 09-25-2024, 05:19 AM
Posted On: 09-24-2024, 10:09 PMPmccooey liked post by mvanhorn8893 On thread : ccx wiring diagramI sent you an email. MikeLiked On: 09-23-2024, 11:37 AM
Posted On: 09-23-2024, 07:28 AMPmccooey liked post by patrickt On thread : Ididit dimmer relayIf you're using a VW turn signal, then use a VW latching relay as well. Piece of cake and you can flash to pass as well. Start here:...Liked On: 09-22-2024, 12:18 PM
Posted On: 09-21-2024, 03:58 PMPmccooey liked post by mrmustang On thread : Help with my CCXSimple and easy to accomplish with hand tools. Bill S.Liked On: 08-04-2023, 07:18 AM
Posted On: 08-03-2023, 01:13 PMPmccooey liked post by DanEC On thread : Shifter rod spacers?My shifter is the same and has two bolts without grommets securing it to the modified Hurst shifter. Mine will bolt down flat but I have used washers and some blue loctite to angle it slightly for...Liked On: 11-12-2022, 09:25 AM
Posted On: 11-12-2022, 08:07 AMPmccooey liked post by ERA Chas On thread : 427 Side OilerThis to me is representative of what's been lost sight-of in the last decade of replicas. So many newer guys have no concept of the differences between SO's and other FE's--Other than it's cost,...Liked On: 10-08-2022, 10:07 AM
Posted On: 08-21-2012, 07:58 AMPmccooey liked post by BKGCCX3127 On thread : Here is Contemporary CCX 3127Here's my Contemporary Cobra. CCX 3127Liked On: 04-21-2022, 08:05 AM
Posted On: 04-20-2022, 08:30 AMPmccooey liked post by tonywyso On thread : Weight on CCXMy weights not a CCX , FFR MKII big block. LF 653 RF 622 LR 681 RR 641 50% CROSS 2597LBS TOTAL with me 150lbs in the carLiked On: 03-31-2022, 03:12 PM
Posted On: 03-31-2022, 02:39 PM
All times are GMT -7. The time now is 08:48 AM.






Likes Received