|
Need some help
Can anyone tell me where I can locate specfic info on a 7.5/460 "super cobra jet-550HP Ford Racing Perfromance Crate Engine.I would like to find paper work on the engine have tried ever where with no luck.what I am looking for is info such such as plug gap etc on the engine
Help |
This it? What ignition are you using?
http://www.jegs.com/i/Ford+Racing/39...521FT/10002/-1 http://www.jegs.com/images/photos/30...007-D514FT.jpg |
The best thing to do is the get the Ford Racing engine number from the engine tag on pass side of block and call Ford Racing Techline, they have the spec sheets on the engines. They changed specs/parts each year on those 460's when they were being produced so you want to get the correct specs.
|
Not trying to be a smart@$$ but
Dennis O'shea Dennis This is something that is not etched in stone. You need to read the plugs and see what the motor likes. If you are running a high voltage ignition system, the gap could be .080". If you are running points, .032". If you are running an MSD system I would start in the .044" range and drive the car for 100 miles, pull the plugs and see the color. You are going to look at the heat range too on the center electriod. As far as plugs, run ONLY Autolites in the motor. If the heads are Aluminum use a LITTLE antiseize to install and remove the plugs. Don't pull the plugs when the motor is hot. Can kill the threads in the head. Some heads have helicoils others don't. Some where between .044"-.060" will be a good place to start. Rick L. Ps they only give you a starting gap. They expect you to either read plugs or take the car to a dyno for a setup.
|
| All times are GMT -7. The time now is 05:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: