| snake65789 |
12-10-2011 06:39 PM |
Help! Ford Racing 514 stroker
I got a 514 stoker crate motor from ford racing and it has aluminum heads trying to figure out what spark plugs i need the holes aren't tapered so i assume i need plugs with washer? Any info is a help!
|
| ERA Chas |
12-10-2011 07:28 PM |
Why not ask Ford Racing-they built it?
|
| snake65789 |
12-10-2011 07:50 PM |
Ford is closed till monday was just trying to get it running this weekend! thanks again for the help!
|
| wrench87 |
12-10-2011 08:03 PM |
try researching on the ffr forums, or try to get a hold of mike forte he is a a ford racing dealer you may find his cell phone number on the ffr site.
|
| wrench87 |
12-10-2011 08:32 PM |
i was thinking if your engine has edelbrock heads go to there site and look up the instructions pdf they will tell you wich plug they reccomend.
|
| bobcowan |
12-10-2011 08:48 PM |
www.FordRacingParts.com does not list a 514 stroker, but they do list two 521 strokers.
Both engines use M-6049-SCJB heads. These heads use a Motorcraft AGSP spark plug.
Pick the heat range that matchs your application, cross referance that to an Autolite (such as a 3926), and go to Autozone and get what you need.
|
| csx4910 |
12-10-2011 09:40 PM |
Before the 521 they had the 514 a few years ago. That motor is a beast. I still regret selling the spf I had that had that 521 in it
|
| Keithc8 |
12-11-2011 12:48 AM |
We use a BKE-6 NGK plug in most of the street engine with 10.5 to 1 or less compression. This plug should work in the engine you have or cross over to another brand if you would like.
We do some of the 514 to 552 C.I. 460 engines with the Aluminum heads, hydraulic roller camshafts on premium pump gas that make 700 to 800HP. You can get real good power out of them for the buck, just a little heavy in front of a Cobra. A lot of the guys say it does not seem to affect their car much.
Good luck, Keith Craft
|
| CarsByCarl |
12-23-2011 09:34 AM |
We use Motorcraft SP-406 or Autolite 3924's with the SCJ heads.
|
| D-CEL |
12-23-2011 09:57 AM |
X2 to the 3924's
|
| All times are GMT -7. The time now is 01:06 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
