|
Trans Length in 545 BBf (auto to manual)
Hi Guys, Dave in UK, after a bit of info, if anyone has parts out of the car, I need the measurements for the trans rear mount from the back of the block for (a) TKO 600/Quicktime 8010 and, (b) C6, I expect when I swop out the trans the mount will be just a re-drilling of the brackets, but am expecting the prop to need modding by around 2"? any info appreciated. Thanks Dave
|
A Quicktime 8010 is 7.050" deep. A TKO 600 is 15.750" from the mounting face to the trans mount centerline.
|
re trans
Thanks Brent,appreciate that. Dave
|
| All times are GMT -7. The time now is 12:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: