|
Bare Block 460 Build
In my shop all torn down all cleaned is my 460 bare block all bores were very clean no scoring...whew you never know off CL as I drove 2 hours one way the kid said he had 3 and I could pick anyone I wanted..fair enough said they were his dads. All that's left is to pop out the cam bearings tool on order. I'm lucky to research the rods and they are the CJ/Truck casting D6VE-AA so I'm only going to keep them.
Pistons ?..press on Camshaft?...extreme power and thump with good idle Heads?...I did buy a set of Dove-C heads Intake? Carb?..manual choke Thanks Cobra Team...Cheers! |
Has anyone here used a Scotty cam he's out of Washington?
|
Barnfind62,
I assume you're referring to Scotty J (aka The Mad Porter) in Tacoma, WA. I met with Scotty last year to discuss my 460 based engine build options. While I haven't used his services yet, your post caught my eye. Was hoping others here who may have used his cams might reply, as you'd asked. However, didn't see any while your post was still at the top. So if it's of any use, on Scotty's Facebook page (RHP / ReinCarnation High Performance), if you click the Reviews link, there are a couple referring to cams. The first is from a customer that bought a cam from Scotty for his own engine builder to assemble, and he relates what his builder had to say about it. May be of some use to you. If you don't get direct third party response here, you may consider requesting references from Scotty, he reflects one or more BBF Cobra engine customer(s) on his Facebook. Good luck...Brent |
| All times are GMT -7. The time now is 09:19 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: