| Dennis Mosley |
12-22-2017 11:03 AM |
What manual Trans is behind your 429/460
For you guys running a 429/460 in their cobra, what manual trans are you using? What bellhousing did you use to mate them up and how do you like it?
|
| keezling |
12-22-2017 02:02 PM |
TKO600 w/QuickTime scattershield. It's all about the overdrive...
|
| kvonbehren |
12-23-2017 08:10 AM |
460/tko 600
I'm currently putting a 545 with a tko 600 in my Mark 111 that originally had a 460 with 3550 tko using a 460 truck bellhousing. The new setup uses a quick time bellhousing. Everything fits great and the only thing I'm trying to figure out is the hydraulic clutch. heard some negatives about the hydraulic throwout bearings so I bought a slave cylinder kit from Glen at Rose Hill performance and I think it will work. The kit is designed for a sbf with Quick Time bellhousing but it looks like it will line up ok with the 385 series bellhousing. Good luck
|
| cycleguy55 |
12-24-2017 07:31 PM |
Richmond Performance Street 5 speed - the old model with 1:1 5th gear. Bellhousing? No idea, the car was built in 1991 and it was in there when I bought it in 2014.
|
| supertruck |
12-26-2017 06:58 AM |
I'm running a Toploader 4 speed with the grand national input, output shafts. Stock bellhousing.
|
| Trubble |
01-04-2018 09:36 PM |
Richmond 5 speed, aftermarket bellhousing. More details when
I get a close look at it on a warmer day
Bill
|
| Unique427 |
07-27-2018 04:27 PM |
Toploader with 1-3/8"
Lakewood Bellhousing
McLeod Clutch
McLeod Bolt-on Hydraulic Throwout
|
| PurpleVenom |
07-29-2018 12:07 PM |
Tremec 3550 with QuickTime bell housing...."manual" cable clutch.
|
| All times are GMT -7. The time now is 08:35 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
