Intake Manifold for 460 SCJ

[cycleguy55]

Torker II will likely cost 20-25 HP & torque, compared to a Victor, per this thread: Good combo for 650hp/600 ft lbs - 460 Ford Forum

The other option, of course, is a taller hood scoop. Shell Valley has them in 3.25" & 3.5" heights, in both fiberglass and carbon fibre. Cobra Replica Hood Scoop

[lastdime]

Guys, It looks like even the Victor requires port matching for my heads. It says, "Runners have plenty of material for port matching to low- or medium-riser style heads".

If I'm going to have to port match a Victor or any other, I think I'll first play with the Torker II I already have and see how that goes.

[Gaz64]

Originally Posted by lastdime

I am hoping to avoid having do a port match. It seems like there should be a match in height and port size for this application but I haven't found it. This all gets pretty confusing when there are details like "SCJ" and "CJ" that can change or ruin everything.

Originally Posted by lastdime

Guys, It looks like even the Victor requires port matching for my heads. It says, "Runners have plenty of material for port matching to low- or medium-riser style heads".

If I'm going to have to port match a Victor or any other, I think I'll first play with the Torker II I already have and see how that goes.

Good to hear you have agreed to do a matchup.

I've yet to see any engine where the intake manifold is a good enough match, especially a V8, and even more so once the block and heads have been skimmed.