Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   429/460 Engine Talk (http://www.clubcobra.com/forums/429-460-engine-talk/)
-   -   Edelbrock Pro-Flo 4 EFI (http://www.clubcobra.com/forums/429-460-engine-talk/144969-edelbrock-pro-flo-4-efi.html)

cycleguy55 07-04-2021 02:36 PM

Edelbrock Pro-Flo 4 EFI
 
Anybody have experience with the Edelbrock Pro-Flo 4 EFI setup, particularly on a 385 Series engine?

https://www.edelbrock.com/edelbrock-...nes-35680.html

Dana E. 07-10-2021 10:54 PM

Quote:

Originally Posted by cycleguy55 (Post 1494497)
Anybody have experience with the Edelbrock Pro-Flo 4 EFI setup, particularly on a 385 Series engine?

https://www.edelbrock.com/edelbrock-...nes-35680.html

I have the Pro-Flo 4 on a 377" small block Chevrolet in one of my cars that dynoed at 440 horsepower and 464 torque. I've only got a few hundred miles on the system, but it has been working very well so far. It's a good value since it comes complete with the manifold and distributor.

Steve Gallegos 07-11-2021 03:25 PM

I have a proflo-4 on my stroker 351. When I bought the car new in 2008 I had the proflo-2 put on, work great until last year, control module went out, so put on the 4. Runs great, but you need someone who knows how to install it and set it up. Not just anyone can do it.

Dana E. 07-13-2021 08:13 AM

Quote:

Originally Posted by Steve Gallegos (Post 1494748)
I have a proflo-4 on my stroker 351. When I bought the car new in 2008 I had the proflo-2 put on, work great until last year, control module went out, so put on the 4. Runs great, but you need someone who knows how to install it and set it up. Not just anyone can do it.

Installing the Pro-Flow 4 is not rocket science. If you can read an instruction manual and possess some basic mechanic skills, the installation and setup is not difficult at all.

joyridin' 07-13-2021 10:33 AM

There were some people *****ing on FB about Edelbrock EFI. In a nutshell, their tech support wasn't up to par and they couldn't get parts after calling multiple times on warranty issues. Take it with a grain of salt though.

Holley has had nothing but good remarks, although their system is a bit pricey depending on which one you buy. I have a couple friends with FAST and they all like it.

Dana E. 07-13-2021 07:45 PM

I've had no problems with the Edelbrock system yet, but I can't say the same about the Holley Terminator system I have on another one of my vehicles. Within two hundred miles, I've had to replace the coolant temp sensor because it read about twenty degrees high and the IAC valve failed.

When I bought my Holley Terminator it came with the postage stamp sized controller which was nearly impossible to see in the daylight. Within one hundred miles, the screen went dark and I had to buy the new updated $300 controller so I could actually see the data.


All times are GMT -7. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: