Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   429/460 Engine Talk (http://www.clubcobra.com/forums/429-460-engine-talk/)
-   -   Cost of head porting (http://www.clubcobra.com/forums/429-460-engine-talk/20006-cost-head-porting.html)

cdog 09-04-2002 04:13 PM
Cost of head porting
 
Hi!

I have a 533 CID with Edelbrock 460 RPM alum heads. I have heard that these respond very well to porting?

What is the cost of a "mild" port job? I dont need eevry last ounce of power, but if a few hundred $$ can add a lot of power, I would like to do it.

Thanks,
C

Jeff Frigo 09-04-2002 10:59 PM
$1,000 to $1500.

tblackgt350 09-04-2002 11:27 PM
Head Porting
 
If you aren't afraid to ship your heads, I would highly recommend Joe Sherman racing in Santa Ana, CA. He fully ported and flow tested my heads for 600.00; I had him do everything because I did want to squeeze out all the power possible. New valve seats, ferrea valves, milling surfaces, new guides, etc. etc. all for 1400.00. Shipping to me in Tennessee was 75.00.

His number is 714-542-0515 best to call about 9 AM PST.

Good luck,

Tim

cdog 09-12-2002 04:04 PM
My guy is charging me $1,100 to really open up a set of Edelbrocks. Seems fair... He has before/after flow numbers. When I get em I'll post em.


All times are GMT -7. The time now is 01:21 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: