|
460ci . . . Where do they go?
Before laughing, just remember this thing was stripped when I got her . . .
Where is the correct placement for the coolant temp sensor and the oil temp sensor on the engine? Just want to be sure here . . . . |
Stick the oil temp sensor in the coolant and the coolant temp sensor in the oil. DUH! :)
Water temp boss should be in intake manifold. Oil temp boss can be built into oil pan or you can put it in a remote oil filter adapter if you are not running an oil cooler. Some of 'em even have 5 holes I think so you CAN run it and an oil cooler. Hope this helps..... |
| All times are GMT -7. The time now is 09:08 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: