- -
ignition timing
(
http://www.clubcobra.com/forums/429-460-engine-talk/61637-ignition-timing.html)
| anthonygasperin |
02-16-2005 07:07 PM |
ignition timing
i have a suberformance cobra with a 460 2 4barrles ford electronic ignition and i'm wondering if some one can tell me what i should set initial timing @ and what should total be and @ what rpm total should come in @
|
| jdean |
02-16-2005 08:50 PM |
20 degrees initial and 36-38 total all in by 3000 is typically what I see recommended for the 460.
|
| Michael Quinn |
02-22-2005 08:43 PM |
Hummmm
I have mine set for 32 at idle (1000rpm) then opening to 50. I have a very loppy cam and roller everything. I have stroked mine to a 514. The recipe I used should get me around 720-750 hp - but I have yet to get it to the dyno to post real numbers.
|
| All times are GMT -7. The time now is 01:52 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
