|
Water pump connection
I have a 1971 429 with a stock water pump. Currently, the expansion tank connects to the heater hose connection on the upper passenger side of the water pump.
I will be relocating the expansion tank to the front cross member of the frame and connect it directly to the radiator. My question is can I just block off the heater hose connection on the water pump? I'm assuming this is an inlet to the water pump (?). |
Yes, as long as the other inlet/outlet is blocked off as well, (on intake below t-stat housing).
|
| All times are GMT -7. The time now is 12:05 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: