Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   429/460 Engine Talk (http://www.clubcobra.com/forums/429-460-engine-talk/)
-   -   Edelbroc torker v torker II (http://www.clubcobra.com/forums/429-460-engine-talk/94621-edelbroc-torker-v-torker-ii.html)

iva bigan 02-07-2009 01:10 AM
Edelbroc torker v torker II
 
Can anyone tell me what is the difference between the edelbroc TORKER and the TORKER II manifolds ?
I have a torker and am wondering if the torker IIs have been changed somewhat in the size of the port to head area.
I need a very low sitting manifold to bolt to FMS scj heads and a better port match than the old torker manifold offers.
Looking forward to your responses.

IVA BIGAN

Tom Wells 02-07-2009 05:50 AM
IVA,

The original Torker has very tiny ports and runners. The newer Torker II is much bigger, both in port size and runner size. The Torker II is the least high (lowest carburetor pad height) manifold you can buy for the 460.

http://www.edelbrock.com/automotive_...orker-bb.shtml

You will find the Torker II ports smaller than the SCJ ports. It isn't necessary to match the port size; apparently the step up into the SCJ port is OK for flow and mixing.

Hope this helps,

Tom

iva bigan 02-08-2009 12:57 AM
Tom
you are wealth of information ,that is exactly what i wanted to hear.

iva bigan


All times are GMT -7. The time now is 05:41 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: