Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   429/460 Engine Talk (http://www.clubcobra.com/forums/429-460-engine-talk/)
-   -   Wire loom for 429 (http://www.clubcobra.com/forums/429-460-engine-talk/98685-wire-loom-429-a.html)

dalew 08-01-2009 11:31 AM

Wire loom for 429
 
Which wire loom is the best for the 429 cobra jet engine? Has anyone tried the Moroso or the Ford Racing loom?

Tom Wells 08-01-2009 12:53 PM

dalew,

I've tried the bigger looms but ended up with something like these: http://www.summitracing.com/parts/TAY-42700/

The fancier looms always seemed to be too bulky to fit considering the inner fenders and headers etc.

Others also make some of the clips in different colors or with a chrome finish. I do like the plastic ones as they are more resistant to crossfire and are lighter so they don't stress the insulation of the plug wires.

Just my fiftieth of a buck!

Tom

kitcarbp 08-01-2009 01:13 PM

seperaters
 
I used these on my 460 and they seem to work nicely and keep my wires north of the header tubes. You have a wider choice of colors since I bought mine as well.

http://www.summitracing.com/parts/MF...5/?image=large

Tom Wells 08-01-2009 05:31 PM

kitcarbp,

Yes! Yes! Yes! Those are the ones I ended up using too. Just couldn't find the link when I tried to answer the question above.

Thanks for posting that!

Tom

dalew 08-02-2009 02:37 AM

Thank you!! I have 9mm Ford racing wires. They offer a racing kit that accepts up to 10.5 mm wires.

kitcarbp 08-06-2009 11:47 AM

Thanks for reminding me, I did have to ream mine just a bit to fit the Ford Racing Wires, as sold they only fit 8mm I think.


All times are GMT -7. The time now is 02:34 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: