Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   AC Cobra (http://www.clubcobra.com/forums/ac-cobra/)
-   -   Need Classic Roadsters side vent inserts (http://www.clubcobra.com/forums/ac-cobra/117486-need-classic-roadsters-side-vent-inserts.html)

eyeballcustom 09-28-2012 12:42 PM
Need Classic Roadsters side vent inserts
 
I am looking for a set of side vent inserts for a classic raodster 427 please lead me to a set. Thanks Jim 903 485 2373:)

okiedokie 09-29-2012 08:24 AM
C.R.Side vents
 
I have a brand new, never used set that are supplied with a Factory Five kit. They can be cut to the size you want. I'll let them go cheap or try Finish Line, Cobranda or any one of the supplier company's . They are not hard to find. You might have to do alittle reshaping of the size of the hole they go into, with these other vents.

Karl Bebout 09-29-2012 02:52 PM
Jim, I think you'll find that the Finishline louvres are much heaftier than FFR's (unless FFR has stiffened their up). I used some industrial Velcro to mount mine and its nice to be able to easily remove them for some easier access to a couple spark plugs. I rivited pieces of angle aluminum to the louvers to have a good surface to attach the velcro. I also used some two part epoxy to attach the velcro to the body and to the angle. Maybe a little overkill, but better than running the risk of losing a louvre.

jwoodard 09-30-2012 09:01 AM
Here's the link for the Finishline Louvers.
Finish Line Accessories


:3DSMILE::3DSMILE::3DSMILE:

eyeballcustom 10-02-2012 08:16 AM
finish line lovers to big

Karl Bebout 10-02-2012 09:09 AM
The louvers don't fit inside the cut out, they are attached to the inside of the fender.

okiedokie 10-03-2012 06:52 AM
Louvers from FinishLine
 
If you enlarge the cut-out alittle, they will fit inside of it and will look alot better and more professional .

tcrist 10-03-2012 05:17 PM
If someone has a set of the CR vents and wants to send them to me, I will reverse engineer them in 3D solid model & make usable blueprints so anyone can have them made. I would return them when done of course.

I would not accept any $ for this because this is what I enjoy doing.


All times are GMT -7. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: