![]() |
body roll 2
I posted this note this morning on shop talk, but got no response. Hopefully my GA natives have the answer. I am getting tire rub on the drivers side and have the coil overs set 3" between body and tire. I really don't want to go any higher and wonder if anyone has had success with any of the kits advertised???
Thanks, Matt |
Well Matt will give it a shot my guess is if you have that mutch room over the tire(if you have'nt got the coil overs at the max) the shocks are not stiff enough.
|
Thanks, I am only 1/2 way down the treads on the coilovers. Not much experience with these so I am trying to figure it out.
|
Matt you should have enough spring if it is not bottoming out with 1/2 left I belive that most Aldan shocks has a damper adjustment on them if that is the case turn the effect up that will slow the body role.
Ken |
matt
my guess is the coil overs need rebuilding i went thru this myself with aldan coil overs, if theyre dropping the body to the tire set on #3 then they probably need a new seal ron |
Matt,
What rearend do you have in your car? Has it been narrowed? Clois |
Matt - from personally seeing your car, I'm going to say it's one of two things (or conbination of both). Your rear end needs to be narrowed or you need wheels with a different offset/backspacing. It really looks like your wheels are sticking out too far, where they should be 'tucking in' under the wells better.
|
Thanks for all of the tips. I think Bud nailed it, as I didn't build the car, it has centerlines and a standard 9" that has not been narrowed. I am also going to check that shock setting.
Matt |
| All times are GMT -7. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: