|
New Slave Cylinder and Bracket for BDR and SPF
I am making a newer style bracket and slave cylinder. Something alittle more adjustable and looks a little better to boot. This will fit your BDR/SPF/Hurricane and many other applications. I have installed these on the Three replicas mentioned. Plus installed on some trucks, mustangs ect... The slave cylinders come with a 5/16 rod which either I'm swapping out with a 3/8 rod or the company will be sending me several more with 3/8 rods in them. These are much easier to bleed and install than my last setup. I still have many bracket of those left and will still sell them until they are used up. Older style is 122.00 shipped and newer style 189.00 shipped. These work well with TKO-500/600 Tremec 3550. They will work with a T-5 but some alterations will need to be done. Take a look see if this may help you out. What is nice about this too, the slave cylinder has a spring inside to push the piston back to help relieve tension on the throwout bearing and clutch fingers.
I left the boot off to show the position of the rod. Bill http://www.clubcobra.com/photopost/d...114_172540.jpg http://www.clubcobra.com/photopost/d...114_172556.jpg http://www.clubcobra.com/photopost/d...114_172548.jpg http://www.clubcobra.com/photopost/d...114_172622.jpg http://www.clubcobra.com/photopost/d...115_132808.jpg _132754.jpg[/img] http://www.clubcobra.com/photopost/d...115_132818.jpg http://www.clubcobra.com/photopost/d...115_132840.jpg |
|
Super nice set-up with plenty of axial adjustment!! Great work.
|
That is a piece of art!
Belongs on the wall! |
Bill, great looking setup. what bore size is your slave, and are rebuild kits available if and when needed.
|
| All times are GMT -7. The time now is 01:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: