460ci.FE Engine Special $11,995.00
Fully Machined 428 block
Stock 428 crankshaft offset ground 4.200 stroke Scat 6700 I-beam rods Diamond Custom pistons 10.1 compression Clevite & Fed-Mog bearings Pioneer SFI Damper Comp Cams Custom Grind Camshaft Morel Hyd.Roller lifters Ford Racing timing set Stock front cover & pointer Melling High Volume oil pump ARP oil pump drive Moroso T-Style oil pan pick up & dip stick Edelbrock Aluminum CNC Stage II heads set up complete T&D Shaft mounted Race series rockers Comp cams push rods ARP Head bolts Original police interceptor PI intake port matched Edelbrock Aluminum water pump MSD Dist. & KCR plug wires KCR Logo finned valve covers Fel-Pro Gaskets Quick Fuel 780 carb Bal.Blueprinted & Assm.Dyno tested & tuned Please call with any questions 870-246-7460 |
Keith,
Crank is cast-are rods and pistons too? Approximate power levels and cam specs? Thanks, |
The Rods are Scat 6.700 I-Beams, Diamond pistons are forged.
This engine should make 550/560 on power. The camshaft is a custom grind from comp. It will be like 236/242 @50 on a 112 lobe. |
with this kind of setup, what would it idle at, and what would you set rev limiter at?
Thanks, |
This engine will idle around 900rpm. It will make max horse power at 6000rpm. You would run a 6000 chip.
|
This engine is finished and ready to go. We can send complete dyno sheets on the engine. Made 570HP and close to 600 ft/lbs of torque. engine is complete and ready to go.
Thanks, Keith |
All times are GMT -7. The time now is 03:23 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: