Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Advertisers Forum (http://www.clubcobra.com/forums/advertisers-forum/)
-   -   Sweet 427MR opportunity for a Cobra owner... (http://www.clubcobra.com/forums/advertisers-forum/122847-sweet-427mr-opportunity-cobra-owner.html)

blykins 10-14-2013 05:50 AM

Sweet 427MR opportunity for a Cobra owner...
 
I have pretty much everything here to build a really nice 427 MR for someone. The block is a really nice 427 S/O, currently standard bore, never been windowed or hurt. Heads are C5AE-F heads, great shape. Can top off with a single or dual carb intake.

Externally, it would look as a 427 should....internally it would be up to date with a hydraulic roller cam, new rods, pistons, etc.

*427 S/O block, fully machined
*Federal Mogul main bearings
*Durabond cam bearings
*ARP main bolts
*427 crankshaft (can do Scat 428 crank as option)
*Custom Comp Cams hydraulic roller cam
*Ford Racing timing set
*New balancer spacer
*New pump eccentric
*Diamond forged pistons
*Total Seal rings
*Scat H-beam rods
*ACL rod bearings
*Internally balance rotating assembly
*Timing cover
*Powerbond harmonic balancer
*Melling oil pump
*Aviaid oil pan/pickup
*Edelbrock water pump
*427 MR heads, new Ferrea valves
*All Comp Cams springs, retainers, etc.
*T&D shaft mounted rockers
*Morel hydraulic roller lifters
*Blue Thunder MR 1x4 intake
*MSD distributor
*All pulleys/brackets
*MSD coil
*Holley carb
*Carter fuel pump
*70A alternator
*Assembled & dyno'd

$17500

B.M.B.C 10-14-2013 10:53 AM

How much $$$ aluminium heads....


All times are GMT -7. The time now is 11:13 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: