|
need help with 17" PSE rims
question is about the way its sit on the hub. The car is SPF
and the rims are 17" PSE. Now there is about half inch space from the back of the rim and the rotor, it seems like the snout or the actual hole of the rim that sits on the hub the PSE is half inch shorter than the original hallibrand the car came with. Other than that it sits fine and you can tighten them good with the hammer. Did any of you guys run in to the same problem? Do I need a spacer to fill that half inch. Because Phil kne the rims were for SPF when I ordered them. |
| All times are GMT -7. The time now is 05:39 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: