|
Cobra calipers, 13" rotors on Mustang II spindles
I now have kits available that economically mount 94-04 COBRA PBR calipers and 13" rotors on Mustang II spindles, utilizing a vintage Mustang drum hub. This kit does not change track width and locates the wheel in the stock position.
Bracket kits are $259 plus $11.65 shipping in USA. Includes pair of brackets, bolts and custom rotor centering rings. Will work on stock Mustang II or lowered Mustang II spindles. You will also need from other sources: Cobra calipers 13" rotors hoses pads A12 & A13 bearings & seal 65-73 Mustang or similar Ford drum hub Total cost for this swap is under $1,000 email for details or check out my ebay store MustangSteve Performance. mustangsteve66@yahoo.com |
| All times are GMT -7. The time now is 06:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: