Trularin,,, Yes, #19 is mine.

Springin

Trularin,
The catch can is Dave's if he want it, but I need to send him some pics/dimensions before he know for sure, We'll update you as soon as we know for sure.
Dave,
A PM has been sent

Jay

Sorry, I've been slackin' off here.
I have one set of New, Uncut MSD Heli-Coil 8mm plug wires.. I haven't used them cause blue & grey don't mix well with my colors... Let me know if ya need em' & I'll figure out what shipping will cost.

Hyde, are they blue with grey boot ends?

I got the wires from *13*. A Big Thanks to *13*!!!
Figure it's my turn to pay it forward so
I have a used aluminum oval Cobra air cleaner for a single 4 bbl. It could use some polishing up. Whoever needs it give a holler.

I could use one of the car cover bags, I emailed Randy.

Yes, Didn't take long. Plug Wires found a home.:MECOOL:

I have a Lincoln Mark VIII fan in excellent shape.

PM me as I travel a lot and it will take a couple of days for me to respond.

Mike

Hi Bob
yes i got the pictures thanks but it was not the cleaner i thought it was, i thought it was the cobra cleaner sorry about all that.

Thanks Jay! I'm definately interested. The pics and dimensions should seal the deal.

Dave

Okay, this is the PAY IT FORWARD list 11-9-2009.

You might be aware, Dean is out of the country for a week.

1. Superformance front marker lenses, clear/white type (Lucas with fluted lense and chrome trim ring); 2 pairs available (see Dean or Rodney)
2. 2 Piece Rear Seal kit for a 351 Windsor; 2 kits available (see Blas).
3. FE/Windsor March Performance 2 groove water pump pulley; 6" dia hi-flow model; part# 1562 (see undy).
4. I have both a 19 and 17 tooth driven speedo gear for a Tremec T600. Let me know if anyone needs them. I will cover postage (see DCDoug).
5. 2 round red tail light lenses that are glass they say "England" and have the number 488 on them; have the 2 trim rings that go with them these are the ones that the rubber grommet holds them in place (see RustyBob)
6. FE engine (complete) in the back of the barn off my crane. (see trularin).
8. 3550 (with shifter) that has a crack in the main case that you can use for parts. Not sure what shape it is in because it was given to me. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
9. 99% of the complete stock heater assy "used" for a CRL C427 (see Terry).
10. set of stock ceramic coated SPF side pipes. They need some cracks welded up. (See Silverback51).
12.Two wheel center caps as sold by Finishline, each aluminum with AC logo. (See vanoochka )
14. Steering wheel center cap (small nick) with AC logo. (See vanoochka )
16. A new Duraspark ignition module. ( See Blas )
17. I have the ROTOR, CAP, and the PLUG WIRE COVER new never used for FE? ( See rustybob )
18. 6 70s Vintage Road America Pit/Paddock passes from Road America (see Chris)
19. Cobra valve covers. ( See springin )
20. Cylindrical Radiator Catch Can. (See Jay 289ACE)
21. Polished alum. air cleaner. ( See springin )
22. Numerous new anodized braided line fittings. ( See springin )
24. I have a Lincoln Mark VIII fan in excellent shape. ( See Mohuska )

Okay, Mick and Hyde, I do not know where the wires are on the list. Thanks for posting results. If one of you could let me know what number it is...

Please include the item number with your post.

Please look over the list and make sure things are correct.

:D

The wires would be number 25;)

Fordzilla i would be very interested in the oval air cleaner ,will send you a PM

I would say the Cobra Air Cleaner would be #26. I sent pics to Maxum & waiting his response. If he doesn't want it, rustyBob is next in line for it.

23. I have two (2) Brand New grey California Car Cover *BAGS* - these hold the "plush weave" car cover. These are not the covers, but the bags with draw strings. ( See Randy Rosenberg )

Randy, please let me know if one of the bags is gone.

Both bags have been spoken for... Just need Ed's shipping address.

Okay!

If you are new to the thread, read Deans first page post.

Updated - 11/9/2009 @ 11:19 am.

:D

Okay, this is the PAY IT FORWARD list 11-9-2009.

You might be aware, Dean is out of the country for a week.

1. Superformance front marker lenses, clear/white type (Lucas with fluted lense and chrome trim ring); 2 pairs available (see Dean or Rodney)
2. 2 Piece Rear Seal kit for a 351 Windsor; 2 kits available (see Blas).
3. FE/Windsor March Performance 2 groove water pump pulley; 6" dia hi-flow model; part# 1562 (see undy).
4. I have both a 19 and 17 tooth driven speedo gear for a Tremec T600. Let me know if anyone needs them. I will cover postage (see DCDoug).
5. 2 round red tail light lenses that are glass they say "England" and have the number 488 on them; have the 2 trim rings that go with them these are the ones that the rubber grommet holds them in place (see RustyBob)
6. FE engine (complete) in the back of the barn off my crane. (see trularin).
8. 3550 (with shifter) that has a crack in the main case that you can use for parts. Not sure what shape it is in because it was given to me. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
9. 99% of the complete stock heater assy "used" for a CRL C427 (see Terry).
10. set of stock ceramic coated SPF side pipes. They need some cracks welded up. (See Silverback51).
12.Two wheel center caps as sold by Finishline, each aluminum with AC logo. (See vanoochka )
14. Steering wheel center cap (small nick) with AC logo. (See vanoochka )
16. A new Duraspark ignition module. ( See Blas )
17. I have the ROTOR, CAP, and the PLUG WIRE COVER new never used for FE? ( See rustybob )
18. 6 70s Vintage Road America Pit/Paddock passes from Road America (see Chris)
19. Cobra valve covers. ( See springin )
20. Cylindrical Radiator Catch Can. (See Jay 289ACE)
21. Polished alum. air cleaner. ( See springin )
22. Numerous new anodized braided line fittings. ( See springin )
24. I have a Lincoln Mark VIII fan in excellent shape. ( See Mohuska )
25.I have several radiator shrouds w/fans, 2 are the Taurus high output ones, one I think came from a Mustang....pictures available upon request.....I will try and get pictures to post as soon as I can....also have one shroud without fan....Earl


Okay, Mick and Hyde, I do not know where the wires are on the list. Thanks for posting results. If one of you could let me know what number it is...

Please include the item number with your post.

Please look over the list and make sure things are correct.

OK, Maxum took my Cobra Air cleaner, It didn't have time to get an official number but would have been #26.

thanks Mick .........i'm just to slow and think about things to much.........

I wish I had more of them to give away to you guys. It was on a barn find 1969 Mustang that I bought years ago along with a set of Cobra aluminum valve covers. A guy told me the valve covers were original as they had Shelby markings cast in. (I gave them to him). I don't see any markings on the air cleaner but maybe someone with knowledge will know if it's an original piece. I could care less about original stuff. I'm a drag racer. I cut up, modify & change to my liking.