|
Compomotive wheel spinner hell
One of my customers has been given the run around like you don't know for his set of spinners that are for his 17 inch HB Compomotive wheels he has paid for them but never got them and from what he's being told he will not get them from the US dealer. The over seas supplier is not helping at all and only will sell him a set of pitted and defective ones. Does any one know of any other spinners that will fit his wheels and were to get them. At this point even if we have to do a little machine work to get them to work we would consider trying any thing at this point.
Stop by and see what we are working on @ www.eddytheb.com |
Fat Chance....
I have Compomotive HB17's and you will be very lucky if you get an acceptable resolution through Compomotive...either in the USA or in the UK.
I have been having my own drama with them recently and was informed that Comp USA was supposedly working with a company called Kodiak (http://www.kodiakmotorsports.com) for some of the components of these wheels. I would check with them. Also, I may be forced to look into new wheels for my car and was talking with the guys at "Team 3 Wheels" (http://www.team3wheels.com) and I am almost certain that they told me that they had actually made a bunch of spinners for unhappy Compomotive customers. If you find any good sources for Compomotive components for their HB wheels....PLEASE post it here and send me a PM. Thanks ! Pig |
The Compmotive wheels look nice, I have seen them spinners on a few Cobras. I am actually looking for a set of 17" wheels and was considering these, what do you think about the wheels and where did you purchase them? Thanks
|
What is the thread and pitch that you need? Is it possible to use the Trigo knock offs on the Compomotive spin on adapters?
Bill S. |
call phill at ps engineering,310, 534 4477 , he should be able to take care of you.
|
stay away
Quote:
|
We did and I have dealt with him in the past with very poor results.
Quote:
|
I tried to order a new spinner or two about two years ago, I called the US office and got no results. Then tried the UK one and they said that they would try and contact them and asked me to try again. All in all I left 4 messages and never got a single return call.
Needless to say I picked up the spinners from a forum member instead. I, in the future will never do anymore business with these guys. Hope you have better results. Todd |
This is a copy of an email I sent to MotorSport Specialties Compomotive wheels this AM. BTW, I orginally ordered these wheels approx 10 months ago. They are for a FF5 IRS Pin Drive set up(not like it hasn't been done before)}}
Alan, I have sent you two faxes in the past two days, made numerous phone calls requesting the tracking number for my wheels that we had agreed on Feb 20th, 2003 you would 3 day air mail on Monday Feb 24th, 2003 When we spoke on March 05, 2002 you stated that the wheels had been shipped ground 7 to 10 day delivery. I asked if you had shipped on Monday Feb 24, 2003 as we had agreed, you stated you did not know when the wheels had been shipped, and that you had not shipped 3 day air because you had lost money on this sale. It's not my fault you lost money on this sale, I did not define the Backspace/offset the first two times the wheels were made wrong. I have given you my fax number, my email address, my message phone, my cell phone, yet you still fail to contact me....WHY? PLEASE CONTACT ME OR CONSIDER THE ORDER CANCELLED! |
| All times are GMT -7. The time now is 11:42 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: