|
Wiring how to??????
I'm almost ready to start wiring my Cobra. This is a restoration of a Johnex.
There was nothing left of the wiring. I'm starting from scratch. Is there a manuel out there so I can learn how to wire from scratch. I'm planing to use a painless harness. The one for a T bucket hot rod 8 circut seems to be the simplest design. What else will I need to add to this? I know I will need odds and ends, but will this provide me with what I need to get from fuse pannel to lights. Some features that we will need / like to have. Keyless fob with start button from Painless reverse lights headlights front turn signals rear turn signals tail/ brake lights wiper motor dash lights gauges/ speed, tach, water temp, oil presure, volts, fuel power for line lock fuel pump electric fan licsense plate light Can some one post a link to a how to thread or point me to a manuel that I could order. I do not know how to do this but I'm determined to learn and do it. Thanks |
You can download the installation instructions from the Painless site. They are quite good.
|
I would get the 10 or 12 circuit harness. The process is pretty much the dame. But then you room to grow, and the ability to add whatever you want. Extra curcuits can be simply coiled and cable tied up behind the dash or in the top of the foot box.
|
Take a look at Ron Francis wiring. They have a unique setup with ability to change it easily. All the wires are marked for where they go (I suspect most do that too).
http://www.ronfrancis.com/ |
Make or purchase a couple of must have tools.A 12 volt power supply with alligator clips and volt/ohm meter.Chasing down wiring is made simple with these on hand.Also take the time to draw up your own wiring diagram to mark your wires color codes.Different colored wires will end up together, without this diagram you will always be in the dark.
|
| All times are GMT -7. The time now is 12:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: