| dlotz |
02-22-2010 12:41 PM |
HELP!!!! Where do I get this part....
2 Attachment(s)
I opened up my Lucas wiper style motor that I received from a FFCobra member and it looks like one of the magnets (connected to the yellow wire) has broken in half!
Do they make rebuild parts/kits for this wiper motor?
The motor was origionally supplied by Factory Five.
Thanks
|
| Double Venom |
02-22-2010 12:49 PM |
dlotz,
I believe that is a electric motor "Brush". Enzo may have them. It's normally just a press fit piece or clamped in place. In fact your "broken" piece may not have broken but just fell out of its home.?
|
| dlotz |
02-23-2010 08:27 AM |
Nope!
I just talked to FL and Enzo does not carry them.
Anyone else know where I can get these?
Thanks
|
| CobraEd |
02-23-2010 08:32 AM |
It only appears to be scratched ???????
.
|
| dlotz |
02-23-2010 08:53 AM |
No
I assure you it has broken in half. Chipped enough off that It will not stay in the holding fingers
|
| CobraEd |
02-23-2010 09:00 AM |
If you cannot find a replacement, can you JB Weld it onto the holding fingers? It is not a stressed part.
.
|
| dlotz |
02-23-2010 09:25 AM |
Quote:
Originally Posted by CobraEd
(Post 1031248)
If you cannot find a replacement, can you JB Weld it onto the holdong fingers? It is not a stressed part.
.
|
I thought of that, but the chipped edge brushes against the center shaft and will catch and yank it right out when the motor turns. |
| CobraDan |
02-23-2010 10:23 AM |
|
| strictlypersonl |
02-23-2010 11:09 AM |
If you have a local place that rebuilds electric motors, you'd be surprised what they can come up with or modify from a stock part.
|
| Woodz428 |
02-23-2010 01:45 PM |
|
| Rick Parker |
02-23-2010 02:02 PM |
Moss Motors or some comprehensive British Car part supplier may be able to provide the brushplate. Other than that, carbon brushes of varying sizes are often available at well stocked hardware stores, you may be able to find a brush that has enough material and size that it can be reshaped to fit what you require.
|
| jschiller |
02-24-2010 08:32 PM |
|
| Larry Spillman |
03-08-2010 03:38 PM |
Contact Cobra Restorers they sell amost everything and may have a supplier to fix yours or get you a new one, You may have an MG or austin healy or jaguar part try british motors part supplier like XKE unlimited in Montrey calif. Good luck Larry Spillman
|
| trularin |
03-08-2010 04:32 PM |
Why on earth did you take it apart? Did it not turn - "Wig-Wag"?
Moss should have it.
:D
|
| All times are GMT -7. The time now is 09:39 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
