Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   1.5 inch rollbar bezels (http://www.clubcobra.com/forums/all-cobra-talk/103009-1-5-inch-rollbar-bezels.html)

ndpace 02-23-2010 12:45 PM
1.5 inch rollbar bezels
 
does anyone know where I can puchase 1.5 inch rollbar bezels that have the oval shape for the rear support bar?
Finishline says they only have them with the oval for the 2 inch bars.

Thanks, Jim

Bernica 02-23-2010 01:18 PM
Good luck with that one! I used the Finishline 1-1/2" ones and got it to work fine. The rear one can be tough, but it will work. See pic in my gallery.

ndpace 02-23-2010 01:45 PM
can you tell me the outer diameter of the bezels? I want to make sure it will cover the hole already in the fibeglass. I dont want to buy 2 sets and have them not work.

Thanks, Jim

mickmate 02-23-2010 03:25 PM
3.375" they need some persuading but can be made to work on the rear brace.

Bernica 02-23-2010 04:22 PM
1 Attachment(s)
The one I have measures as follows:

Outside of rubber grommet = 3-3/8"
Outside of chrome ring = 2-7/8"
Inside of chrome ring = 2-3/8"

Bernica 02-23-2010 04:27 PM
Sorry, correction:
INSIDE of chrome ring = 2-1/4"
I measured one of the standard ones instead of the one on eh rear that needed the "massage".

jwd 02-23-2010 04:40 PM
Russ made mine - http://www.norcal-cobras.com/store/r...uss_garage.htm

If he doesn't have a template for your application, you can send him one and he'll make them for you. Mine is 1 1/2" and the rear is oval. They came out perfect. I highly recommend him. He's done several for us Hurricane folks.

Jim

Bernica 02-23-2010 05:10 PM
Those are some beautys! Wish I'd found them before now. Maybe when I run out of things to do.....yea, right.


All times are GMT -7. The time now is 04:34 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: