|
Please check my wiring....thanks
1 Attachment(s)
Just checking to see if this is correct. Let m eknow if you guys see anything wrong.
I forgot to draw in the Remote selonoid and the voltage regulator casings are grounded to the block along with the MSD. Thanks |
Anyone out there?
|
D -- Greetings, some notes ;
1. There should not be a wire between the Dist and the coils -- 2. In an MSD setup the only wires attached the coil leads should be from the MSD. 3. The TACH lead in the MSD should be grey I thought. 4. I cannot see the detail of where and how your *A* terminal is wired from the VR to the rest of the system. 5. the *I* terminal on the starter solenoid can be used to feed things as it is just a "Lug" for 18-22 gauge wire. you can have an ignition relay feed the I terminal and use it to feed things like electric chokes, MSD switched on leads, or >? a larger drawing with the relays and their connections outlined would be helpful! hope this helps. Steve |
Quote:
|
ahhhh -- didnt see that detail.
|
I am getting a few post about the ALT wire needing to be on the other post of the kill switch. They are saying that it needs to be on the battery feed side.
|
| All times are GMT -7. The time now is 08:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: