Hey Ford Racing -- where is the M-6007-M5L.
 

Greetings, -- ford racing has been talking about the 2011 5.0L (Coyote) motor , as seen in the Mustang GT for 2011' as a crate engine.

they released the part number in December , had more leaks in Feb .-

the PN # M-6007-M5L with a 6999 price tag. -- plus $1500 for the computer.

If you search ford racing , and summit racing sites -- they come up with product not found.

You would think on the ford racing parts site - that they would have a placeholder for the part number with some pre-release info.

--Ford guys -- COME ON __ !!!

UPDATE 7-25-2010 =-= still NO NEW NEWS.

Steve,

Hold your breath! :LOL:

If you think that's bad, the updated, upgraded replacement for the A460 block has been shown at the last three (or is it four now?) PRI shows. The only one I've actually seen so far is the plastic mock-up.

Sometimes these things seem to take rather too long.

Tom

Ask'em about the 427s... :(

Steve, any word as to a package like the EROD ???

Write to Summit Racing and give them the part number. They will reply back after they research it. It may not appear on their site.

Is this what you are waiting for?
http://mustangforums.com/forum/musta...ine-spied.html

Seagul, -- those are some old photos. --

The EROD is a sweet little package.

If you get Horsepower TV on SPEED, the just did a EROD install with FF on the FF GTM car, replacing an LS1. --

The Episode is on itunes for 1.99. --

Cool, thanks Steve

7-25-2010 == I watched the RE_RUN of the EROD episode of Horsepower TV -- and as of July 25th 2010 ,- Still no ford emissions compliant crate engine.

Where is the coyote / New 5.0L guys >?

I know it may not be as interesting as selling a complete car....

Update 10-15-10 a full 6 months after my first post. The m-6007-m5l (now called the m-6007-m50) showed up on "Horsepower-tv" this weekend with 2 guys from Ford Racing. ( turns out it was one guy from FR and one guy from dunne rite performance)

The funny part : the FR project manager guy had to call tech support to find out what RedLine was --on the engine-- WTH?

So as mentioned the new part number for the engine is m-6007-m50 they do have a top end cover kit ($140) , a alternator kit ($245) and a ford computer kit that has showed up and is available for the new 5.0' finally --it is listing out at 1700$.

So your propoosed budget is this ;

Motor 7k ( by the time you get it home /shop)
Computer 1500-1750
Alt 250
Covers 150
Fuel pumps / lines 500
Flywheel 400
Clutch 350
Starter 250
Oil filter remote 200
Cooling tubes 200
Mounts $x
Trans $x

The open questions for me are ;

1. Where is the Mechanical oil pressure port (probably could get this feed from the
2. Water temperature port (for the smiths gauge)
3. Oil temperature port ( probably can use the current SPF oil filter mount )
4. Does the computer have a fan relay activation lead ?
5. Is there a spare port for a fan switch in the cooling system ( kinda not needed if #4 works)
6. Since this required a return system for fuel - what other changes are made ?

In the HPTV episode it goes into the factory five 33 hot rod. The show it running with an alternator, a GM alternator (GRRRR) and very sloppy front end ducting.

I am dissapointed in how the FRPP launch of the 5.0 is being supported , I would hope they would have it in more places, have better info, an install guide online, something.

Bottom line ;Fragmented misleading commentary on the episode made me want to scream.

Anyone want to start a automotive TV program?

Steve