Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   FoMoCo 2x4 Intake Value??? (http://www.clubcobra.com/forums/all-cobra-talk/105051-fomoco-2x4-intake-value.html)

StreetSnake 06-14-2010 02:35 PM

FoMoCo 2x4 Intake Value???
 
I was hoping the vast knowledge on this forum could once again help me out. I recently picked up a 67 Terlingua Mustang which has 2 650s(I found out) atop a 302. In the process of deciphering what cfm carbs I had I noticed the intake looks to be an original FoMoCo high rise 2x4 manifold. My question is; Are these exceptionally rare? I was debating going to a single carb setup and if I could sell the original to recoup some money it might sway my decsion. I hope you can help or at least point me in the right direction. Any estimates on value would be great too. Thanks again

StreetSnake 06-14-2010 05:08 PM

Nothing?? :LOL:

Bernica 06-14-2010 05:27 PM

What's the casting number? Should be something like "C7AE-??". Let me know and I will try to tell you what you have. That will narrow down what it's worth.

StreetSnake 06-14-2010 05:32 PM

I'll have the car in front of me on Saturday. As I recall, I looked but only saw the firing order casting on the top and the FoMoCo casting on the side???

Jerry Clayton 06-14-2010 05:47 PM

I didn't know they had a high rise 302

Bernica 06-14-2010 06:12 PM

That's why I want to see the casting #. I don't see any 8v manifolds for the 302's in my literature so far....:cool:

StreetSnake 06-14-2010 06:35 PM

I'll have to check for the casting number on mine but I believe the following is one: c8fe-9424-a. Still learning on this topic. thanks for the patience.

lovehamr 06-15-2010 07:47 AM

Quote:

Originally Posted by StreetSnake (Post 1058196)
I recently picked up a 67 Terlingua Mustang which has 2 650s(I found out) atop a 302.


By this, do you mean that it's one of the 67 Sheby Team Trans Am cars? %/
Is the engine a tunnel port 302? I only ask because that intake # is for a dual quad tunnel port 302. Here's a pic, note the ports:

http://mustangtek.com/Intake/images/C8FE-9424-A_01.JPG

Steve

Bernica 06-15-2010 09:34 AM

Quote:

Originally Posted by StreetSnake (Post 1058294)
I'll have to check for the casting number on mine but I believe the following is one: c8fe-9424-a. Still learning on this topic. thanks for the patience.

According to my books, that's a Boss 302 Trans Am racing manifold....

StreetSnake 06-15-2010 05:29 PM

Lovehmr, it's not a true terlingua race car, just a replica unfortunately.;) It looks pretty much identical but not the real thing. As for the intake, I was just going through the part books I had looking for what it might be and threw that number out. I'm 99.9% positive it is not a tunnel port intake.

My best guess is it's a 65-66 dual carb intake. It has two holleys that sit atop it List 3360 & 3361. I'll have the car in front of me on Saturday so I'm going to pull the date codes off the carbs and hopefully the casting # off the intake.

StreetSnake 06-15-2010 05:41 PM

Here is a pic of my new toy. It should be fun and I can fit all three boys in it, unlike the cobra.

http://www.clubcobra.com/photopost/d.../Terlingua.JPG

StreetSnake 06-15-2010 08:04 PM

I think this is what I have:
http://members.shaw.ca/blueoval/fairlane289.htm


All times are GMT -7. The time now is 03:27 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: