Something to keep me from acting fuelish.
|
| ERA Chas |
06-30-2010 09:06 PM |
Where you gonna put the sensor(s) undy?
|
| RICK LAKE |
07-01-2010 04:24 AM |
Great little monitor
Undy Dave That's a great little piece of equipment for monitoring the motor when running. The biggest pain is having the bung hole installed in the pipe. They do have clip ons for the a dyno rooms. The only thing I have found is the location of this sensor doesn't get the combo of exhaust from all 4 cylinders on that side. You also might want to use your temp gun and check each cylinder pipe for temp. This will also tell you lean and rich holes. You could put the gauge on a flip up or down plate. If you are driving you have 8 gauges to look at in 2-3 seconds before you have to stop??? Highway checker with no body around. Remember that those cooler nights and the better air will make the motor run better. I guess you call them ocean runs. Rick L.
|
Both me and one of my sidepipes currently have a bung hole:eek::D One's threaded, one's ........
I had one installed on my right sidepipe when my shop was dialing in the carbs in the first place. We made 15 or 20 pulls on the chassis dyno. I just need to pull the plug 'n thread that puppy in.
Rick-motorhead extraordinaire, I got my Raytech laser temp gun (on loan from my HVAC business) strapped to my right side in a "quick draw" holster, just itching to fire a few well aimed shots at an unsuspecting header tube. I'll keep the gauge visible on the dash, right next to my fixed Halon fire extinguishing system's pull knob. I can't help it ol' Shelby didn't build 'em right in the first place.:cool:
|
| Mac VABCH |
07-01-2010 05:49 AM |
Undy,
Which Dyno show are you using in Va Bch?
|
Quote:
Originally Posted by Mac VABCH
(Post 1062059)
Undy,
Which Dyno show are you using in Va Bch?
|
I used Abacus Racing on Baker Rd.. |
| All times are GMT -7. The time now is 05:34 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
