|
I'm using a flat 9" base with a 9" K&N XStresm top. Not a dropped base. The OD of the filter needs to be 9", and the ID needs to be 7" or less, with a height of 2" or 2.25".
The problem is that the 1050, 2630, 2640, and 2710 don't state the ID, so I don't know which will work with the Xstream top. Has anyone used any of those filters with that top? |
Lippy,
If you use Jegs Auto Parts and enter the part numbers you stated you can go to more information and click on specs and it will give you the sizes. The one closest to what you are looking for is the #E-1050; #E-1050 is 9 inches OD by 7 inches ID and 2 inches high. #E-2630 is 9 inches OD by 7.125 ID and 2 inches high #E-2640 is 9 inches OD by 7.12 ID and 2.25 inches high I'm using a E-2720 which is 9 inches OD by 7.5 ID and 2.5 inches high with the 9 inch E-Stream top and Bernica's flat base. It's sitting on a Quickfuel Drag 850 Double Pumper Carb. http://www.clubcobra.com/photopost/d.../SDC104881.JPG |
Thanks Gary. Really appreciate it. I did go to the Summit site to try that, but they didn't give ID dimensions for those specific filters. For some reason I guess Jegs does.
I thought I needed 7" ID or less to work with that filter top, but it looks like you used a filter with a smaller ID. Did you need to trim it? |
7.5 ID works perfectly with no trimming. The real issue is the height as I originally had a 2.75 and it was too close to the edge of the scoop with the engine offset to the passenger side a bit so I had to drop to the 2.5. The whole setup works extremely well.
|
| All times are GMT -7. The time now is 10:10 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: