Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Looking for cobra accessory vendors (http://www.clubcobra.com/forums/all-cobra-talk/107904-looking-cobra-accessory-vendors.html)

cobra dave437 11-29-2010 09:43 PM
Looking for cobra accessory vendors
 
I'm primarily looking for a replacement shifter and knob for a Backdraft roadster. I want one that is angled down and more toward the front of the car. The tranny is a T-600.
I bought one from Finish Line but had to send it back because the bolt holes were too small.
What other vendors are out there for cobra parts?
Thanks

mkassab 11-30-2010 05:27 AM
Quote:
Originally Posted by cobra dave437 (Post 1092938)
I'm primarily looking for a replacement shifter and knob for a Backdraft roadster. I want one that is angled down and more toward the front of the car. The tranny is a T-600.
I bought one from Finish Line but had to send it back because the bolt holes were too small.
What other vendors are out there for cobra parts?
Thanks
Drill out the bolt holes....

Cashburn 11-30-2010 06:32 AM
What he said... Did you get the proper shifter for your application?

You can also modify your original shifter, think heat and bend.

cobra dave437 11-30-2010 08:23 PM
Quote:
Originally Posted by Cashburn (Post 1092999)
What he said... Did you get the proper shifter for your application?

You can also modify your original shifter, think heat and bend.

I thought I was getting the proper shifter for the TKO-600. When I realized it didn't fit I called and that is the only one they sell. That's another program.

What other vendors are out there for cobra parts?

bubbatoot 12-01-2010 05:00 PM
soft top
 
am looking for soft top for classic roadster.this chassis is 4 inches longer than most cobras

cobra dave437 12-01-2010 05:46 PM
Quote:
Originally Posted by Cashburn (Post 1092999)
What he said... Did you get the proper shifter for your application?

You can also modify your original shifter, think heat and bend.


The BDR shifter appears to be chrome. It could be highly polished stainless.

Xack 12-03-2010 07:50 PM
Everett-Morrison has Soft tops to fit your cobra
 
Quote:
Originally Posted by bubbatoot (Post 1093451)
am looking for soft top for classic roadster.this chassis is 4 inches longer than most cobras
Bubba,
Everett-Morrison has Soft tops to fit your cobra. They make cars which have cockpits in different lengths to accomodate taller drivers. Give them a call.

Xack


All times are GMT -7. The time now is 02:33 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: