|
What could I expect to make? HP?
351w Stroked to 392
flat top piston not sure exact cr Edelbrock RPM heads with 2.02 intake Edelbrock RPM air gap intake Deamon 650 carb mild cam not sure on the specs. Has a good lump to it nothing radical. Do you think it will be in the 400 range? |
With the 392 stroker kit, you should be running a dished piston or your CR may be too high to run reliably on pump gas. Somewhere in the 16-22CC dish would be appropriate.
Without the specs on the cam it would be hard to tell what to expect on the HP ratings. THe RPM heads aren't the best for breathing, but with a pretty middle of the road cam like a Comp cams 274 or 282 or a TW Stage 2 cam you should be able to hit 400 HP at the flywheel without too much trouble. Bob |
It will be in the 400's...how deep will depend on what cam you run, if the heads had been worked, etc.
|
| All times are GMT -7. The time now is 02:08 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: