|
Looking for a Jag rear rebuildable core...
Looking for a 4HU center section with stubs....
I don't care what gears are in it or what diff is in it, it will all be replaced. Anyone have anything that they would like to sell? I searched the classifieds, but only found items that were 3-4 years old. |
Look back in the Classifieds. I believe his member name is "Grubby" he has an entire Jag setup out of an ERA for sale. If you buy the whole setup I may be interested in the shocks and springs which will offset your cost.
Look Here: http://www.clubcobra.com/classifieds...uct=3477&cat=4 -Mike |
I got one jambed under the workbench. pretty sure its 4.11s with powerloc, been there forever, i'll take a $150 for it, you pay the shipping
|
Bruce, sent you a PM.
|
There is a Jag 4HU case and cover on eBay. I saw it last night. No gear set or carrier, just a case if you're interested.
Larry |
If Brent doesn't want it, I'll take it. I then can sell mine to Brent. 4.11 is perfect for what I want. Mine has 3.23. Too low for my car.
|
Quote:
John |
Looks like the shipping is killing the deal for Brent, they are 2.88s according to the tag on the rear cover, so still up for grabs for $150, and I have the outer hub carriers/wheel flanges for another $150 , $250 for everything , this stuff is heavy, $o you gotta figure out how to $hip them.
|
Bruce, I sent you a PM....if you can ship FedEx, I've shipped Toploaders through them before. I'll go ahead and take the rearend.
|
since i gotta drain the rear end grease, how about i tear it down and send the main case in one box, and the stubb axles and ring gear/ diff in a 2nd box, that should save on the shipping. whattaya think?
|
I'm at your mercy but that sounds wonderful.
|
You know...depending on where Bruce lives, are you sure (if you have the time) i isn't cheaper to drive up there and pick it up? Maybe a 5 hour drive for you? Just a thought...
|
pittsburgh
|
6 hour drive via Yahoo maps. Probably less using a GPS. Just a thought...
|
I'm not fond of driving 12 hours.... ;)
Bruce, just throw her in a box, let me know how much and how you want it. |
FedX man says $90 bucks for shipping, you still in?
|
Bruce, just to make sure....it's an older style case with the four bolt holes on the top, right?
If so, I'm in brother....let's roll with it. |
yep, 4 boltholes on the top, 4HU casting, i'll blo it apart over the weekend and box it up , get it out the first part of next week, pm your address
|
Done......
|
| All times are GMT -7. The time now is 01:54 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: