Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   sidepipes (http://www.clubcobra.com/forums/all-cobra-talk/110203-sidepipes.html)

littlewave 04-17-2011 07:34 PM
sidepipes
 
Any opinions on how Shell Valley sidepipes sound?

Thanks, Little Wave..

Mastiff107 04-18-2011 10:18 PM
I got'em on mine and I like the sound. They set off all the car alarms on every car I drive by so I know they're working.

littlewave 04-19-2011 09:56 AM
Just what I wanted to hear..No pun intended:3DSMILE:
Quote:
Originally Posted by Mastiff107 (Post 1123569)
I got'em on mine and I like the sound. They set off all the car alarms on every car I drive by so I know they're working.

littlewave 04-28-2011 12:00 PM
I bought Shell Valley side pipes for my car(not finished or engine fired up yet) they are 2" ID. My motor is a 351w with about 370 hp. my ? is are 2" enough or should I look into 2.5?

Thanks, Little Wave...

elmariachi 04-28-2011 12:59 PM
They sound like this:

VROOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMMMMMMMMMMM M.

:LOL:


If its the same ones Hurricane was using back in 08 and 09, I have them on my 427 FE car and they sound awesome. But beware, the welds inside that hold the baffles in have been known to come loose and then they rattle. Don't know if anyone at SV has acknowledged that but I'd be sure and ask that they be double-checked prior to final assembly to be sure the internals are not just tacked by welded adequately.

elmariachi 04-28-2011 01:01 PM
And if they are slip fits, you really need to look at flanging them instead.

littlewave 04-28-2011 01:04 PM
Thanks elmariachi. But are they 2 or 2.5 id?
Quote:
Originally Posted by elmariachi (Post 1125697)
They sound like this:

VROOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMMMMMMMMMMM M.

:LOL:


If its the same ones Hurricane was using back in 08 and 09, I have them on my 427 FE car and they sound awesome. But beware, the welds inside that hold the baffles in have been known to come loose and then they rattle. Don't know if anyone at SV has acknowledged that but I'd be sure and ask that they be double-checked prior to final assembly to be sure the internals are not just tacked by welded adequately.


All times are GMT -7. The time now is 04:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: