Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   lining inside of rear fenders: what to use? (http://www.clubcobra.com/forums/all-cobra-talk/110557-lining-inside-rear-fenders-what-use.html)

xlr8tr 05-10-2011 10:41 AM
lining inside of rear fenders: what to use?
 
Hello all, now that I'm finally actually driving this beast, I get to work on things that I've only been reading about!

One issue that comes to mind is, with the Billboards, as advertised they pick up and throw every little rock on the road. Sounds a bit loud, and I'd like to avoid a big rock getting thrown causing a crack or something.

What have you used to line the inside of the fenders: just the rears for me as fronts have a liner.

Cheers,

Silverback51 05-10-2011 10:51 AM
I bought a gallon of Herculiner for mine. Did both front and rear and got six coats on it.

No problems after 3 years.

mpanten 05-10-2011 11:01 AM
I did both the truck bed liner and the foam mats from top of the hill. However you could probably make the foam liners yourself pretty easy.

xlr8tr 05-10-2011 12:27 PM
Quote:
Originally Posted by mpanten (Post 1128087)
I did both the truck bed liner and the foam mats from top of the hill. However you could probably make the foam liners yourself pretty easy.
There is some kind of bedliner on there now, but I like the foam idea, probably nice and quiet- what kind of foam is it?

xlr8tr 05-10-2011 02:40 PM
excellent, thx

Bob In Ct 05-10-2011 05:31 PM
An OBG - I have had the Top of the Hill product for years with no issues.

http://www.clubcobra.com/forums/supe...ing-liner.html

TButtrick 05-10-2011 06:19 PM
These are made for Factory Five cars but perhaps you could make them work or cut your own pattern.

Wheel Well Liners

http://acroadsterinteriors.com/images/fenderliner.jpg

noblec5 05-10-2011 07:41 PM
I used a combination of Dynamat and neoprene. Works great!

mpanten 05-11-2011 08:04 AM
Quote:
Originally Posted by xlr8tr (Post 1128088)
There is some kind of bedliner on there now, but I like the foam idea, probably nice and quiet- what kind of foam is it?
I would describe it as almost a neoprine, I had one fall off, I will just make my own next time, others on here have purchased padding from a home improvement store and epoxyed them on there. I just think 300 plus is a bit much for foam pads.


All times are GMT -7. The time now is 03:36 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: