Club Cobra - Performance Engineering

Club Cobra (http://www.clubcobra.com/forums/)

- ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)

- - Performance Engineering (http://www.clubcobra.com/forums/all-cobra-talk/110761-performance-engineering.html)

Quote:

Originally Posted by BBQCYCLEWERKES (Post 1131757)

Was the oil pan damaged? Did the pan bottom out on the track? You were tracking the vehicle when the oil pick up broke. I've seen that happen if the pickup screen is very close to the bottom of the pan and you bottom out the pan. It will then bend or even break the pickup tube from the welds.

No, never bottomed out. and the track thing... Ya I wanted to go fast sure, that was my intention. but it was the first session of the day and I had to start dead last because of the lead follow situation. The car quit on lap 4. I get the track excuse and understand it completely. But in this case it truly had nothing to do with what happened here.

Quote:

After selling a ton of SPF car and having a working relationship with PE in the past, I can say without a doubt that I would personally have Eric install my drivetrain....hands down.

PE may do a great job of installing drivetrain components,but, what we're talking about here is building engines and so far I haven't seen anything to make me buy one of his engines....one failed after ONE MILE and another in less than 700 miles.......well, if you don't see the point, you never will.......

David

Cut & dried for me -
Eric admitted he made a couple of serious mistakes with that build.
Eric admitted he would share the costs to make it right.

Done deal, Eric needs to pay up.
Even if he does, PE is out of the picture for me, no customer should have to go through this kind of crap to recover losses from a faulty product.

Quote:

Originally Posted by AL427SBF (Post 1130681)

Hum, PE didn't make it right 1st time, PE didn't fix it 2nd time, PE holding back on promised restitution because of alleged slamming - even if it were true, like that clears the books :LOL:

Shame! Shame! Shame! PE is never get my biz or recommendation.

"PE is never get my biz or recommendation"

Yeah, and you won't get my nomination for english teacher of the year.

Then:

Quote:

Originally Posted by AL427SBF (Post 1131889)

So you are an expert on what went down?

You are buying a product that PE sells and although you were considering PE now you will not purchase from PE? Come on, stop making wild statements.

The shame is when people get into the middle of a fight and make posts that are uniformed, or just trying to raise their post count.

I have had two PE engines, and although I have trouble with the second motor, Eric fixed it for free out of warranty.

I personally would not have taken this dispute to the internet, but I respect the OPs decision to do so. I do hope you get to an agreement with PE.

It has been discussed on this forum before how difficult it can be to interpret a disput like this. Engine builder not making good? Owner with expectations too high?

I hope you guys get it worked out.

E

You must have me confused with someone who actually gives a rat's ass what you think :LOL:

Cut the crap, plain and simple.

Discuss the topic on its merit or I'll clear the room.

thanks
Ron
ClubCobra Moderatir

Quote:

Originally Posted by Great Asp (Post 1131907)

"[color="Red"]
Yeah, and you won't get my nomination for english teacher of the year.

It has been discussed on this forum before how difficult it can be to interpret a disput like this. Engine builder not making good? Owner with expectations too high?

E

E

If you are going to be critical of someone else's grammar, you should run your post through a spell check.

Jack

Quote:

Originally Posted by computerworks (Post 1131922)

Cut the crap, plain and simple.

Discuss the topic on its merit or I'll clear the room.

thanks
Ron
ClubCobra Moderatir

Ron,

I actually think this thread should be closed at this time. Everyone has had their say. Eric has chosen to be non-responsive. I think everyone has formed an opinion of Performance Engineering.

Jack

Thanks...I sense that too.

Done