Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Fender Louver Mounting (http://www.clubcobra.com/forums/all-cobra-talk/111736-fender-louver-mounting.html)

csingletary01 07-18-2011 06:28 AM
Fender Louver Mounting
 
Any one have any pics of Fender Vent/Louver mounting. Now that I have driven my Cobra 15K miles I am reading to finish body work and paint. I want to mount louvers and need some suggestions.

wrench87 07-18-2011 07:15 AM
i used 1 inch aluminum flatstock, i drilled and tapped holes and installed stainless steel screws with red locktite then i used sem adhesive and mounted the aluminum to the inner fender. you can mount the upper and lower flatstock to the vents then mount it as a unit.

Bill Bess 07-19-2011 03:08 PM
thin Alum. angle works good for the vents, and then use (1/4 "perforated bolts) from Mc Masters Carr. The perforated bolts have a washer like head with holes, you can use a small amount of bondo to attach the perferated bolts to the inside fenders so the vents are positioned perfectly. :D

Mine has been on there for 4 years now, no problems.
Bill

Karl Bebout 07-19-2011 05:56 PM
Use the angle aluminum. Rivet to the top and bottom surfaces of the louvers. Attach HD velcro to the verticle sides of the angle aluminum with the mating velcor to the inside of the fender. Will securely and still be easy to remove when needed.


All times are GMT -7. The time now is 07:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: