|
Shipping FE heads - Anyone have empty Edelbrock boxes, or a better idea?
I finally have a set of heads sitting in my garage.:) I have to ship them from Houston to Kentucky, to Brent, for a rebuild. I'm thinking the easiest way to package them would be in a set of empty Edelbrock FE head boxes with the packing they originally used. They'll be nice and safe in there, and it's easy to do. If anyone has an unused set of Edelbrock FE head boxes and packaging laying around, I'd be more than happy to pay to have them shipped to my place empty so I can get them on the way to Brent.
If anyone else has a better idea, I'm all ears. I'm not sure of an alternative or best way to package two cast iron cylinder heads. Also, whats the best way to send these? UPS, FedEx, someone else? Thanks. Doug |
if your sending them to Brent, see if he has some head boxes, you could try also to call barry over at survival motorsports for boxes. i had the same dilemma when i had my heads redone, i had keith craft mail me boxes to send him the heads.
and UPS was the most cost effective..... Fred |
i have an empty sbf afr box that you could borrow, don't know the size of your heads. shipping would prob be 15-no more than 20 ea. way.
|
What heads did you get Doug?
When I bought my iron TP heads the seller built 2 little wood crates for them. Little heavy but worked very well. |
I bought a pair of C4AE-6090's locally here in Houston. They need a small bit of work on two exhaust mount holes, and of course a rebuild. Other than that they look great, they don't appear to ever have been cut and they came fresh out of a mag check for cracks, they checked out clean.
|
Nice! Glad you found a good set I know you've been looking a while.
|
Sweet! Sounds like you are on the way to motoring down the road!
. |
Doug,
Bubble wrap works great for shipping heads. Just wrap them a couple times around and drop them in a box and bring them to UPS. Bob |
I understand at a Staples u.p.s. counter they will box anything you are shipping from there for $5.00. Last I heard.
|
| All times are GMT -7. The time now is 11:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: