|
Cobra to Complete for cheap
Recently somone was looking to buy a Cobra for cheap to complete. I know of one in SW Missouri that is complete except for paint and some assembly. I built the engine (347 stroker which dyno'd around 475 hp). Bill, The owner is retiring from the Police force and moving to Montana (I think). If you have any questions give Barry a call at (417-472-7848)
I was told that Bill had well over $35K in the car and was willing to take around $25K. |
I posted this the other day and put the telephone number down wrong. If you are interested in a Cobra that that you can spend minimal dollars to complete this might be your ticket.
The correct telephone number to call is 417-472-7848. Good luck. Clois |
| All times are GMT -7. The time now is 07:22 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: