| Jeff Frigo |
03-23-2012 05:28 AM |
Axle Caps (Hole Diameter)
Can somebody give me the hole diameter on original ID of front and rear axles (the cap OD. Is the front and rear the same?
|
| strictlypersonl |
03-23-2012 06:34 AM |
If you have our 6-pin setup, the front and rear caps are the same. On the early cars, the (retaining) O-rings might be different from front to rear.
You realize that we've got the plugs?
|
| redmt |
03-23-2012 06:45 AM |
Quote:
Originally Posted by strictlypersonl
(Post 1182344)
If you have our 6-pin setup, the front and rear caps are the same. On the early cars, the (retaining) O-rings might be different from front to rear.
You realize that we've got the plugs?
|
For the uninformed you might mention who "we " is.:confused: |
| strictlypersonl |
03-23-2012 09:13 AM |
Sorry. My fame is only exceeded by my assumptive power. "We" is the ERA factory.
|
| Jeff Frigo |
03-23-2012 11:31 AM |
Quote:
Originally Posted by strictlypersonl
(Post 1182369)
Sorry. My fame is only exceeded by my assumptive power. "We" is the ERA factory.
|
I know that. :3DSMILE::3DSMILE:
Bob:
I have an old set of the inserts (GT40) style that used Center Line wheels. The threaded part of the center adaptor is solid. I would like to drill it open, thus the question, what is the ID. :p:p:p |
| strictlypersonl |
03-23-2012 05:09 PM |
Spec for the hub ID is 1.821".
|
| mickmate |
03-23-2012 07:01 PM |
That's a dimension, a spec includes a tolerance ;-)
|
| Jeff Frigo |
03-23-2012 08:29 PM |
Quote:
Originally Posted by strictlypersonl
(Post 1182431)
Spec for the hub ID is 1.821".
|
Thank you Bob. Same front and back? |
| strictlypersonl |
03-24-2012 06:36 AM |
Quote:
Originally Posted by Jeff Frigo
(Post 1182455)
Thank you Bob. Same front and back?
|
Yes.
And for Mickmate: +/- 0.004" http://www.erareplicas.com/smiles/clap.gif
And for the moderators: Smiles don't seem to be working. The above is my own link. |
| computerworks |
03-24-2012 06:53 AM |
Quote:
Originally Posted by strictlypersonl
(Post 1182485)
|
Testing...x x x
you are correct... none of the enhancements (bold, u/l, etc.) are working either...thanks |
| All times are GMT -7. The time now is 09:55 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
