|
Missing bezels seals for my 45 degree roll bars
My rear (oblique) roll bars are 1.5 inch in diameter and I never got any seals for the bezels and was wondering what I could use,any suggestions that could work. I was thinking about tube from bycycle tires,do they make seals for those bezels. Back in the days they didn't have any but I have to put some because the straight bars have it so...Thanks for your suggestions !
|
One solution is to use some small diameter rubber tubing - like fuel or vacuum line - and cut a piece longer than the entire circumference of the opening. Slit the tubing, fit it into the opening, and trim the ends to fit. That's what ERA provided for mine car.
Hal |
Thanks Hal,that's a great idea and possibly the best way to go,that should work perfectly,thanks again !
Michel |
If you have Bezels then you can make the seals out of 1/8" neoprene. You buy it is various sheet sizes off Amazon.com
|
Slit tube as suggested with the end trimmed to length then super glued together.
http://img69.imageshack.us/img69/7756/ccxrearbrace.jpg |
Use 3/8" rubber radiator overflow hose. It is pliable and easy to work with.
|
Thanks guys for ideas,will go look around for those items,cheers !
|
| All times are GMT -7. The time now is 11:54 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: