Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Superformance MkIII floor mats with Cobra logo (http://www.clubcobra.com/forums/all-cobra-talk/116019-superformance-mkiii-floor-mats-cobra-logo.html)

MGlad 06-14-2012 09:59 AM

Superformance MkIII floor mats with Cobra logo
 
Hillbank has floor mats for the Superformance MkIII, but the Cobra logo says "SHELBY." I spoke with Dave at Hillbank and he called their vendor. They are in the process of obtaining the licensing to make the floor mats with "COBRA" in the logo. He said to check back in about 3 weeks.

MKIII Floor Mats W/ Cobra Logo, Floor Mats; Cobra Parts, Superformance Parts, Superformance Cobra Parts, Shelby Cobra, Shelby Cobra Parts, Superformance MKIII Parts, 289 Cobra, 289 Shelby, Shelby Daytona Coupe, Shelby CSX 6000, Cobra Parts, Cobra, Co

Also, would anybody know where to obtain the hooks for these? It appears in the picture there are the openings at the bottom of the mat for the hooks to hold the mat. Mine slide all over now.

Hammer65 06-14-2012 10:04 AM

I used Velcro tape available at most hardware stores. No hooks and no holes in mats. Works great

MGlad 06-14-2012 10:18 AM

Quote:

Originally Posted by Hammer65 (Post 1195631)
I used Velcro tape available at most hardware stores. No hooks and no holes in mats. Works great

Thanks Hammer. I was thinking of using Velcro, but wasn't sure how well the strips would stick to the mats and the carpet. I want to get another set of nice and clean mats to use for cruise nights and shows. If I ever get the darn thing registered!

SunDude 06-14-2012 10:20 AM

I use Mat-Loc clips from GGBailey. They work great to keep those mats in place.

You can order them from GGBailey or through Amazon.

Blas 06-14-2012 10:52 AM

You have a PM message....

JBCOBRA 06-14-2012 11:49 AM

Does anyone have/make black mats with no logos?

Got the Bug 06-14-2012 05:04 PM

Finishline makes mats specifically for Superformance cars with the Cobra logo. The quality of the carpet isn't that great. I wore a hole in the drivers side carpet after about 4 years/8K miles. Just replaced them with another set from Finishline due to the limited options.

MGlad 06-14-2012 06:26 PM

Quote:

Originally Posted by Got the Bug (Post 1195685)
Finishline makes mats specifically for Superformance cars with the Cobra logo. The quality of the carpet isn't that great. I wore a hole in the drivers side carpet after about 4 years/8K miles. Just replaced them with another set from Finishline due to the limited options.

Thanks for the tip Doug. I got a set now, but I want some clean ones to put in for cruise nights and shows. These are only $75, the ones at Hillbank are $175!

Finish Line Accessories


All times are GMT -7. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: