|
Tie rods ends for Backdraft
Does anyone know where I can buy a pair of tie rod ends for a backdraft, Backdraft is out. They are off a 1976 Mazda Pirnasens, an overseas model, or if someone knows the equal model here in the US :confused:
|
Does the Hollander Interchange Manual have anything?
Surely, with the Internet, these can be found. The BDR seems like about three BMW versions as well as a inverted RHD Toyota power steering rack on p/s cars. Does anybody really know what is where on these cars? |
Are your tie rods straight or do they have a dip in them between the stud/boot and the threaded end?
See if Spicer #4011251 looks right or application for 1974 Mazda RX-3. |
http://www.jcwhitney.com/tie-rod-end...d1444y1976g2j1
This is a straight one for a 1976 Mazda. This may be totally wrong. I hope not. |
I've got 2 brand new ones you could have but I'm a little far away!
I have a PS rack in my BDR number 440 and its out of a PS Part Number TOYOTA COROLLA EE90 88-93 44250-12480 RHD HYDRAULIC If that is of any help. I found out (luckily) on adjusting tow in/out that my tie rod ends were only screwed with its current toe in spec by 4 threads. Safe would be 12. I went to do a steering alignment/toe in check and the rods wound off the ends!!!!!!! Disaster was waiting for me but I found it first! I've since upgraded steerig arm thickness and also gone to adjustable tie rod ends to wind out any bump steer. http://store.bimmerworld.com/gc-adju...rods-p979.aspx Good luck with your search. Hope some of this helps. Spookypt |
| All times are GMT -7. The time now is 01:11 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: