| patrickt |
08-13-2012 04:05 PM |
Quote:
Originally Posted by D111
(Post 1204837)
Would it be that the idle mixture screws would now need readjusting?
|
Yes. Move the screws all the way in until they lightly seat, back both out about 1 and 1/4 turns (equally on both sides), put the vacuum gauge on the manifold fitting, usually at the base of the carb in the front, adjust both sides in equal increments until you get your highest vacuum, then turn each in about an 1/8th of a turn. Then adjust idle. N.B., if the air bleeds were partially clogged and you had adjusted stuff to compensate for that, then the settings will be out of whack when the bleeds are clean. After you've adjusted it, if you have vacuum secondaries, put a zip tie marker on the shaft and take it out and WOT throttle it. Then look and see if the secondaries fully opened. |
Quote:
Originally Posted by patrickt
(Post 1204844)
Yes.
|
sent you a PM |
| All times are GMT -7. The time now is 09:56 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
