| eyeballcustom |
09-09-2012 09:45 PM |
Classic Raodster II frame motor mount
Any one know what frame motor mount stands were use on classic roadster II frame ? Frame has plate about a 8 inchs long welded on each side with two holes to bolt them too. I am using a
87, 5.0 with 5 speed in this build.
|
| tcrist |
09-09-2012 11:25 PM |
Custom by Classic Roadster. You will have to make your own.
|
| StreetSnake |
09-10-2012 06:42 AM |
Email jeff at celina custom auto. Is has built/is building quite a few. He may have some extra parts or fab it for u in case u don't want to.
E-mail: jeff@celinacustomauto.com |
| eyeballcustom |
09-10-2012 01:48 PM |
Thnks sent him email.
|
| All times are GMT -7. The time now is 11:59 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
