|
Relax on the oil cooled thingy " it's just in jest
we can fun and crack some jokes on the forum too " |
I think that cap with the pressure relief lever is not sealed properly. When your cooling system gets hot, natural expansion will lift the spring loaded cap seal and force fluid into the overflow, then when it cools it sucks it back in, lifting the tiny valve in the cap. Under the cap lid, there is another seal, to prevent air being sucked in. With your lever style cap, that is not sealed.
Have you also removed the allen plug on top of the thermostat housing and bled out all the air?. That seems to be the highest point. JD |
| All times are GMT -7. The time now is 09:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: