Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Superformance cobra fan (http://www.clubcobra.com/forums/all-cobra-talk/118460-superformance-cobra-fan.html)

Rapid Ride 12-25-2012 03:42 PM

Superformance cobra fan
 
Hello, I'm new to this site and a new superformance cobra owner. I am working on repairing the car I bought. I have found that parts very hard to find. I am looking for a fan blade, not one of the little ones in front of the radiator, but one of the functional ones located inside on the shroud. It is mounted to a Bosch motor, but the fan itself only says "Germany" and a few numbers. Anyone have any idea where I can find this part? I looked on the hillbank/ superformance site, but it is not listed there. Any help would be appreciated. Are there other parts sources for these cars? Thanks in advance for your help

Blas 12-25-2012 06:12 PM

Call Dennis Olthoff

patrickt 12-25-2012 06:57 PM

What you would think to be an obscure question has actually been asked so many times that I remembered Panavia's post on it. Here: http://www.clubcobra.com/forums/981283-post9.html

SPF1061 12-25-2012 08:01 PM

What Blas said. Dennis Olthoff can identify and source any part you could possibly need for any Superfromance product ever made.

Olthoff Racing
(704) 647-9924

Rapid Ride 12-25-2012 08:14 PM

Thank you Blas and Patrickt. I will call Dennis olthoff and start looking at 88 jettas, and hope I find a match. It's hard for me to fathom how difficult it is to find parts for this car being built so recently, when I just finished building a 45 yr old car and had a much easier time sourcing parts. (Granted it was a very popular 68 Camaro). Thanks again for your help. I am greatfull for a site like this where there are knowledgable people that are able and so willing to help.
Brent
P. S. Blas I have ordered one of your wiring diagrams, and am looking forward to all the valuable information. Thanks in advance.

r67cat 12-26-2012 02:46 AM

Welcome Brent, you will find Blas wiring diagram extremely helpful and far superior to any other. Lots of help here for you to tap. I would also recommend you look at the Superformance Cobra Owners Forum (SCOF) where there is a wealth of information including a cross reference parts page and technical help. Rick
Superformance Owners Association

Blas 12-26-2012 09:00 AM

From the research I have done on our cars fans.
The fan assembly (part number #0 130 107 262) was never supplied on a car sold in North America.
My notes suggest looking for info on a VW GOLF JETTA A3 (1993-1999) What-ever that is. The fans were common on Europe model VW's and Audi's.
This info came directly from BOSCH the manufacturer of the fans and motors.
I believe Bosch has discontinued the fan assembly model too.
You can source a aftermarket fan assembly on the web, but I have never found just the blade available.

If I understood your post correctly, you only need a fan blade and not the entire fan motor assembly, that's why I suggested contacting Dennis Olthoff. You could replace the broken blade with a similar sized fan blade, but I would make both blades the same in style.

Thanks for the kind words regarding the MKIII Wiring Diagrams. I'm always happy to help out.

Rapid Ride 12-29-2012 03:39 PM

For future reference, after a junkyard excursion, a 1989 Jetta has the perfect match!
Thank you for your help everyone.
Brent

patrickt 12-29-2012 03:42 PM

Quote:

Originally Posted by Rapid Ride (Post 1224897)
For future reference, after a junkyard excursion, a 1989 Jetta has the perfect match!
Thank you for your help everyone.
Brent

Well, Brent, I'll remember it. For the other contributors on this thread, I really can't say....:LOL:

Blas 12-29-2012 05:08 PM

Brent,
Is it an exact match for the motor and the blade or just the blade?
Or perhaps just a 10" blade that fits?
Good find...

Rapid Ride 12-30-2012 06:41 AM

Blas. The blade is an exact match, same numbers and markings exactly. The motor I removed it from looked very similar as well, except the connector has three wires, whereas my motors only have two. I didn't compare numbers on the motor, just the blade.

Blas 12-30-2012 07:43 AM

Excellent, then my info on the motor is still appears correct. I'll update my collection with the replacement blade info you discovered.... Great find.
p.s.Three wires on the motor is probably for an air conditioned car.


All times are GMT -7. The time now is 05:05 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: