|
V-band clamps
Hi all,
i`am interested in knowing what the thoughts are on fitting V-Band Clamps on merge collector to side pipe mufflers are and if there are advantages, also what the thoughts are on how they look. I have been fabricating my own headers in stainless steel and side pipe system on my Southern Roadcraft Cobra here in the UK, i have previously purchased a set of Classic Chambered mufflers with 3in internal pipe 24in length but i `am unsure about directly welding my merge collectors to the inlet. I have looked at the V-Band Clamps as an alternative to directly welding together, but was concerned if they look smooth and neat, and exhaust gas leakage, also would they be a rigid fit so not to flex, so i`am interested in any ones opinion on fitting them, regards, Gary. SR427COBRA UK |
i use them on one of the jbl's. they are strong, made of stainless. i have no regrets. if you want to change the collector out for another it is easy, just have to have the male or female connector portion welded on, whichever is appropriate. my collectors sit on a craddle with 2 springs holding them in.
http://www.clubcobra.com/photopost/d...003_Small_.jpg http://www.clubcobra.com/photopost/d...005_Small_.jpg |
V-Band clamps
I use them they are a good strong way of attaching the side pipe, not prone to leaking. I am a bit of a stickler for original looks but see this as an improvement.
|
Thanks for the replies,
i think i will be going with the V-Bands, and like you say it makes the muffler section -interchangeable so as in my case my classic chambered pipes are un-cladded, so could always purchase a set that are in case the others are to loud, regards, Gary. |
| All times are GMT -7. The time now is 11:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: