|
Exhaust heat.
I'm in the process of fitting side pipes, and I want to know what the minimum distance to the fibreglass body is?
I've got about 20mm now.I've made my own header, running into a cat, then into a 1 metre long hot dog. Would this also be quiet enough? JD |
I would think that you would be ok on the noise level but remember those cats put out a lot of heat. Depending on the color of your car, can you get high heat reflective tape in that color to run along the bottom of the body beside the pipes. I used that and it worked very well and when I took it off after about a year the paint was still just like new.
Ron :) |
| All times are GMT -7. The time now is 01:18 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: